 |  | 
  
This Schroth Rallye 4 Quick Fit harness is designed specifically for the new MINI Cooper. These belts offer "clip-in/clip-out" convenience with a minimal amount of installation. Go here for more details.
(click photo to enlarge)
Home >
MINI Cooper Race Gear >
Schroth Rallye 4 Harness for MINI Cooper
Do you autocross your MINI? Are you aware that Schroth Restraints has developed a 4-point harness that clips in and out of the new MINI Cooper and Cooper S?
Designed specifically for the new MINI Cooper and Cooper S. These unique belts offer "clip-in/clip-out" convenience with a minimal amount of installation. Most points simply click into the MINI factory seat belt female receptacles. Where an additional attachment point is needed, a small quick release connector is installed to a readily accessible stock seat belt point in less than ten minutes. When not in use, the entire harness is simply unclicked and removed from the car. This is the first and currently the only DOT approved aftermarket harnessbelt of its kind. No drilling holes or removal of factory belts. This belt “piggybacks” the factory seatbelt bolt points, meaning you leave your factory belts installed and can use them whenever you are not using the Schroth harness. Available in Red, Blue, and Black. This harness may only be used in the new MINI!!
Another key selling point is that the MINI belt utilizes the factory pre-tensioner by clipping into the factory female receptacle. The pre-tensioner tightens the lap belt about 2” during an impact, further preventing the occupant from submarining. Also, since the MINI Belt clips into the female receptacle, the computer recognizes the seat belt is in use and deploys the airbag at a slower, less violent rate
Colors available: black w/grey lettering, red w/black lettering, blue w/black lettering.
Installation Instructions (right click, save as)
NOTE: The outboard side lap belt mounting point on the 2005+ MINI's has changed slightly, but the MINI Quick-Fit belt will still work in the car. These harnesses will NOT work in the 2007+ MINI.
Warning: Please read all installation instructions that come with your harness belt. Also take special note of the "Installing Safety Equipment" section of our Legal Disclaimer.
|
|